Buscar
Mostrando ítems 1-10 de 17
Modelo de la calidad del agua en redes de distribución con flujo permanente
(Instituto Mexicano de Tecnología del Agua, 1996)
Se presenta una metodología para la simulación de la calidad del agua potable en redes de distribución, estructurada con un modelo hidráulico y un modelo fisicoquímico. Considerando flujo y concentraciones permanentes y ...
Avances en la hidráulica de redes de distribución de agua potable
(Instituto Mexicano de Tecnología del Agua, 2014)
Esta obra contiene una exposición de temas relevantes de la hidráulica de las redes de distribución de agua potable, con énfasis a desarrollos de los autores que han sido publicados a través de artículos científicos en ...
Reducción integral de pérdidas de agua potable
(Instituto Mexicano de Tecnología del Agua. Coordinación de Tecnología Hidráulica, 2001)
Elaboración del estudio de actualización del padrón de usuarios, catastro de redes y sectorización en la ciudad de Anáhuac, municipio de Cuauhtémoc, estado de Chihuahua
(Instituto Mexicano de Tecnología del Agua. Coordinación de Hidráulica, 2019)
El principal objetivo de este estudio ha sido contar con la actualización del catastro de la red de agua potable de la ciudad de Anáhuac, en el estado de Chihuahua, así como el desarrollo de un modelo matemático de dicha ...
Optimización de los diámetros de las tuberías de una red de distribución de agua mediante algoritmos de recocido simulado
(Instituto Mexicano de Tecnología del Agua., 2003)
La determinación de los diámetros de las tuberías en el diseño de menor costo de una red de distribución de agua es un problema con restricciones, fuertemente no lineal, con múltiples óptimos locales, cuyo espacio de ...
Dynamic behavior of contaminants in the water distribution network of Cuernavaca, Mexico: a real application of multiobjective distributed reinforcement learningComportamiento dinámico de contaminantes en la red de distribución de agua de la ciudad de Cuernavaca, México: una aplicación real de aprendizaje por refuerzo distribuido multi-objetivo.
(Instituto Politécnico Nacional., 2008)
El uso eficiente del agua se puede establecer a través del reúso o recirculación de efluentes. El diseño o configuración de sistemas que contemplen el uso eficiente de agua con base en el reúso se torna complejo e involucra ...
Videotutoriales autodidácticos en línea para modelar redes de distribución de agua potable y alcantarillado
(IMTA. Coordinación de Hidráulica. Subcoordinación de Hidráulica Urbana, 2012)
Se presenta la metodología utilizada para el desarrollo de videotutoriales sobre modelación hidráulica, los cuales serán difundidos en Internet.
Análisis del costo por metro cúbico en conductos a presión de gran tamaño en México
(IMTA. Coordinación de Hidráulica, 2013)
Este proyecto tiene por objeto obtener costos de conducción del agua, de infraestructura, operación, mantenimiento y recuperación de inversión, para determinar los costos índice por zona geográfica y ser aplicados en ...
Modelo de calidad del agua en redes de distribución
(Instituto Mexicano de Tecnología del Agua, 2004)
Se presenta un modelo de calidad del agua potable en una red de distribución, el cual incluye las tuberías de tres pulgadas de diámetro y mayores. La aplicación se realizó en la zona norte de Culiacán, Sinaloa, México, que ...
Sistema de cómputo para el análisis y diseño óptimo de redes de distribución de agua potable
(Instituto Mexicano de Tecnología del Agua, 1996)
Se presenta un nuevo sistema de cómputo que automatiza y optimiza el diseño de redes de agua potable, con las siguientes posibilidades: digitalización, análisis estático y dinámico, selección óptima de los diámetros, diseño ...