Search
Now showing items 51-60 of 157
Desarrollo de tecnología para el diseño contra socavación en pilas y estribos de puente mediante rugosidad artificial y diseño hidrodinámico
(Instituto Mexicano de Tecnología del Agua. Coordinación de Hidráulica, 2017)
El objetivo del proyecto fue desarrollar experimentalmente tecnología de diseño para reducir la profundidad y el volumen de socavación local en pilas y estribos de puentes y estructuras similares, por medio de dos recursos ...
Stage monitoring in turbid reservoirs with an inclined terrestrial near-infrared Lidar
(MDPI, 2016)
To monitor the stage in turbid reservoirs with a sloping bank, it has been proposed to install a near-infrared Lidar on the bank and to orient it so that it points at the water surface with a large incidence angle. The ...
Invernaderos rurales abastecidos con agua de lluvia y equipados con sistemas de subirrigación controlada
(IMTA. Coordinación de Hidráulica. Subcoordinación de Tecnología Apropiada e Industrial, 2010)
En un contexto general, la propuesta del proyecto se orientó a la implementación de un estudio experimental para la producción de alimentos en pequeñas superficies bajo condiciones controladas (invernadero de 1,000m²), con ...
Revisión técnica de proyectos ejecutivos, diagnóstico para rehabilitación de una planta de ósmosis inversa, y muestreo de fuentes para el abastecimiento de agua potable a la ciudad de Chilpancingo, municipio de Chilpancingo de los Bravo, Guerrero
(IMTA. Coordinación de Hidráulica., 2013)
Los objetivos del proyecto han sido llevar a cabo la revisión técnica de los estudios y proyectos ejecutivos elaborados para rehabilitar la línea de conducción Acahuizotla; sectorizar la red de distribución de la ciudad ...
Dispositivo para desazolve en presas: segunda etapa: aplicación en campo
(IMTA. Coordinación de Hidráulica. Subcoordinación de Obras y Equipos Hidráulicos, 2016)
Considerando la importancia de conocer el comportamiento del material sólido producido o generado en cuencas de ríos de montaña, especialmente en zonas con suelos de escasa vegetación y altas pendientes, los objetivos del ...
Supervisión y emisión de dictamen técnico de cumplimiento del proyecto de modernización del área comercial de la Comisión Estatal de Aguas de Querétaro (CEA) en el municipio de: Ezequiel Montes
(Instituto Mexicano de Tecnología del Agua. Coordinación de Hidráulica., 2018)
El Programa de Modernización de las Áreas Comerciales de Organismos Operadores de Agua Potable tiene como fin fortalecer los ingresos municipales a través del incremento de la recaudación de los derechos por consumo de ...
Análisis del costo por metro cúbico en conductos a presión de gran tamaño en México
(IMTA. Coordinación de Hidráulica, 2013)
Este proyecto tiene por objeto obtener costos de conducción del agua, de infraestructura, operación, mantenimiento y recuperación de inversión, para determinar los costos índice por zona geográfica y ser aplicados en ...
Uso de software para la gestión de proyectos hidráulicos
(Instituto Mexicano de Tecnología del Agua, 2013)
Por lo general, las herramientas que se utilizan para la planeación de proyectos han sido de gran utilidad para alcanzar las metas. El control y seguimiento de los proyectos no son la excepción, pues además son una parte ...
Videotutoriales autodidácticos en línea para modelar redes de distribución de agua potable y alcantarillado
(IMTA. Coordinación de Hidráulica. Subcoordinación de Hidráulica Urbana, 2012)
Se presenta la metodología utilizada para el desarrollo de videotutoriales sobre modelación hidráulica, los cuales serán difundidos en Internet.
Proyectos piloto eficientes y de bajo costo de sistemas de riego en El Rodeo, El Jagüey y Las Cuevas, Tzintzuntzan
(IMTA. Coordinación de Hidráulica. Subcoordinación de Tecnología Apropiada e Industrial, 2010)
El proyecto forma parte de la tercera etapa del Programa para la Recuperación Ambiental de la Cuenca del Lago de Pátzcuaro. En un contexto general, se proyectaron, concertaron e implementaron sistemas de riego intermitente, ...